JLL 2000 Series, User Manual

Page: 32 / 72

6-7
FIG. 2
Note: Leave enough space between the bracket and the car's bottom to avoid
damaging it in the event that the cabin would reach the buffer.
Once the tape is attached, lower the bracket down by tightening the screws. Continue
until the tape's tension is adequate.
6.2.3. Tape reader installation:
Install the magnetic reader on the car's top (see Fig. 3 and 4).
Note: Be careful to align the reader vertically and horizontally with the selector
tape.
FIG. 3 FIG. 4
To move the tape in the reader, remove a plastic pad located at the back of the reader
by unscrewing the two thumbscrews (see Fig. 5).