PAGE 44 of 89
6.2. Placement of Crawler on Inspection Surface
6.2.1. Chain System
1.
Determine the diameter of
the pipe or tube to be
scanned. Included in the
SKOOT • X
kit and in this
manual are setup charts
which indicate the number
of links required based on
the diameter of the pipe or
tubing. Refer to the
appropriate chart based on
the number of probes to be
used when scanning
(Fig. 88)
.
2.
On a flat surface, connect the appropriate number of links as indicated on
the setup chart
(see “SKOOT • X Chain Configuration Setup Chart” on page 89)
.
CAUTION!
Do
NOT
handle crawler using
the umbilical cable. Use the provided handle.
Ø
Fig. 88 - Refer to setup chart
Fig. 89 - Assemble configuration
