PAGE 18 of 89
4.3.5. Umbilical
The umbilical provides the power, network
distribution as well and encoder signal
transmission between the crawler and the power
controller.
4.3.6. Auxiliary Cable
The auxiliary cable connects the handheld
controller to the power controller. 36VDC and
network signals are used in the cable.
Both auxiliary cable connectors are identical and
interchangeable. The cable may be plugged into
the 4-pin receptacle on the power controller or
the crawler’s umbilical.
NOTE:
Inspect the cable and connectors for damage before use. When any damage
is evident, the cable must
NOT
be utilized. The use of a damaged cable may
be a safety hazard and could also put other system components at risk.
4.3.7. Detector Bracket
Holds the detector in place.
4.3.8. Source Cart
Holds the source in place.
Fig. 28 - Umbilical
Fig. 29 - Auxiliary cable
Fig. 30 - Detector bracket
Fig. 31 - Source cart
