PAGE 25 of 89
EB0162 Rev 00
To configure the
SKOOT • X
magnetic system for scanning, follow these steps:
1.
Mount a detector to the
2
detector bracket
(see “Attaching Detector to the Detector
Bracket” on page 29)
.
2.
Attach the
2
detector bracket to the
1
crawler
(see “Mounting Detector Bracket to
Crawler” on page 30)
.
3.
Connect the
6
power controller to the
1
crawler using the
3
umbilical.
4.
Connect the
5
handheld controller to the
6
power controller using the
4
auxiliary cable.
5.
Insert
7
AC/DC power supply into the
6
power controller.
CAUTION!
DO NOT DISCONNECT
UNDER LOAD.
Shut off power before connection or
disconnecting. Permanent damage to electronics
could occur.