PAGE 38 of 89
5.8. Cable Management
The cable management provides a means of bundling and protecting cables and
hoses that connect to the scanner.
5.8.1. Cable Management Dovetail Mount
To attach cable management, follow these steps:
1.
Loosen the knob on the cable management dovetail mount. Position the
mount onto the red dovetail link
(Fig. 70)
.
2.
Once centred on the red dovetail link, tighten the cable management’s
dovetail mount knob
(Fig. 71)
.
5.8.2. Cable Management Setup
1.
Open the cable management. Begin at the clamp end and start placing the
cabling in the tube
(Fig. 72)
.
2.
Close the clamp and zip the tube closed
(Fig. 73).
Fig. 70 - Loosen and slide on
Fig. 71 - Tighten knob
Fig. 72 - Insert cables and hoses
Fig. 73 - Zip to close
