PAGE 139 of 185
CX0540 Rev 00.1
2
Zero Button
Sets the current position to zero for all
modules.
3
Module Position Button
(s)
Displays the current position of the crawler.
Press to set the position to any value using
the
Edit
screen. When a module position is
modified, the position will be modified for all
other system modes. When the right crawler
module is connected, the crawler position
displayed refers to the position of the auxiliary
idler encoder which is located between the
module’s wheels.
NOTE:
This function only zeroes the number
displayed on the
NAVIC
handheld
controller. It does not zero the position
used in the data acquisition instrument.
4
Module Rate Button
(s)
Displays the current maximum rate for the
selected speed mode. Press to set the
maximum rate using the
Edit
screen. The
movement commanded by the joysticks will
be limited to the indicated rate. When a rate is
modified, the rate will be modified for all other
system modes.
5
Exit Button
Exits the jog mode and returns to the
Mode
Select
screen.
6
BiasOn/BiasOff button
(Fig. 340)
When the Steering Bias setting is non-zero, a
button is displayed to allow steering bias for
the right steering joystick to be turned on and
off.
(see “User Settings Screen” on page 145)
Jog
SCAN
BiasOff
Exit
Crawler
0 mm
Zero
200 mm/s
6
Fig. 340 - BiasOn/BiasOff button identification