PAGE 27 of 185
CX0540 Rev 00.1
4.2. Tools
4.2.1. Included Tools
The included 3 mm hex driver
(Fig. 76)
is suitable for most typical adjustments
within the
NAVIC
system.
Also included in this kit is a 3/8 in
wrench
(Fig. 77)
which is used to
remove and install probe holder pivot
buttons.
The included 3 mm flat driver
(Fig. 78)
is useful for releasing the flaps of the
raster arm’s cable tray.
4.2.2. Optional Tools
Some specialized adjustments require tools that are not included with this kit.
Fig. 76 - 3 mm hex driver
Fig. 77 - 3/8 in wrench
Fig. 78 - 3 mm flat driver
Fig. 79 - 1.5 mm hex
wrench
Fig. 80 - 2 mm
hex wrench
Fig. 81 - 2.5 mm
hex wrench
Fig. 82 - 3 mm
hex wrench
