PAGE 88 of 185
5.8.6.2 Probe Holder Vertical Adjustment
1.
Gently lift the heavy duty vertical probe holder and simultaneously pull
the latch
(Fig. 224)
. This action will unlock the probe holder. Slowly lower
the probe holder towards the scan surface
(Fig. 225)
.
5.8.6.3 Probe Holder Left/Right Conversion
1.
Using the supplied 3 mm driver, unscrew the yoke
(Fig. 226).
2.
Position the yoke and arms to the opposite side of the probe holder
(Fig. 227)
.
Fig. 224 - Press up and pull latch
Fig. 225 - Lowered toward scan surface
Fig. 226 - Remove yoke
Fig. 227 - Orient to opposite side
