11
JH INDUSTIRES INC.
WELD
DOCKLEVELER
MOUNTING PLATE
DOCK
(CONCRETE)
STEEL
APPROACH
WARNING
!
INSTALLATION WITH
STEEL APPROACH RAMP
1.
Position the Steel Approach Ramp flush with the
front face of dock.
(See Figure 8).
2.
Install anchor bolts in the steel approach ramp.
All anchor bolts to be a min. strength in shear of
10,000lbs. Force and a min. of 6,000lbs. Pull out
strength in uncracked concrete. When bolts are
tight in the concrete, remove nuts, cut bolts flush
with top of steel approach ramp and plug weld
bolts to plate.
All anchor bolts must be installed in accordance
with the manufacturer’s instructions. Improper
installation may result in death or serious injury.
Do not install anchor bolts in cracks or expansion
joints in concrete. Installation in cracks or
expansion joints may cause the anchors to come
loose and pull out. Use of improperly installed
anchor bolts may result in death or serious injury.
NOTICE!
All anchor bolts to be a min. strength in shear of
10,000lbs. Force and a min. of 6,000lbs. Pull out
strength in uncracked concrete.
3.
Proceed to GENERAL INSTALLATION section on
pages 13 & 14 of this manual.
INSTALLATION,
CONTINUED
FIGURE 8
Summary of Contents for Copperloy EDGE-OF-DOCK SEL Series
Page 2: ......
Page 33: ...33 JH INDUSTIRES INC S1 S2 B A HYDRAULIC SCHEMATICS...
