JH Industries Copperloy EDGE-OF-DOCK SEL Series, Installation & Owner'S Manual

Page: 23 / 42

23
JH INDUSTIRES INC.
MAINTENANCE
SOCKET
HAND LEVER
LIP
RAMP
LEVER
SOCKET
MOUNTING
PLATE
MAINTENANCE
Before servicing the dockleveler, read and
follow all Safety, Warnings and Manuals.
STAND CLEAR! The dockleveler moves toward
you. Always be certain the ramp is in the raised
position, SECURED WITH THE MAINTENANCE
STRUT
(See Figure 24) before servicing
dockleveler. Failure to do so could result in
death or serious injury.
Always return the dockleveler to stored position
after service. Failure to do so could result in
death or serious injury.
INSERT MAINTENANCE STRUT
1. Using the hand lever, position the dockleveler in
the full back position.
(See Figure 18).
2. While one person holds the hand lever down as
shown in
(Figure 18), another person standing,
on the drive surface must position the lip to its
full upright position
(As shown in Figure 24).
3. With the ramp and lip in the full upright position,
move the hand lever to the maintenance socket
location.
(As shown in Figure 24).
REMOVE MAINTENANCE STRUT
1. With the ramp and lip in the full back position,
move the hand lever back to the lever socket
location. (
As shown in Figure 18).
2. While one person holds the hand lever down, as
shown in (
Figure 18) , another person standing
on the drive surface must position the lip back
down to the full back position
(As shown in
Figure 18).
3. Using the hand lever lower the dockleveler to
the rest position as shown in (
Figure 16). While
lowering dockleveler to the rest position it is
necessary to have another person use a pipe or
similar device to hold the lip extender link from
engaging on the extender pivot bushing (
As
shown in Figure 23 ), to prevent the lip from
extending out away from the dock.
Do not use hands or feet to hold lip extender link
disengaged. Use of hands or feet could cause a
pinch point resulting in death or serious injury.
FIGURE 23
FIGURE 24
WARNING
!
WARNING
!
LINK EXTENDER
LINK
LOWER
LINKAGE
ROLLER