OM131
25
P1939-OM-131 R11
Chapter 2
The harness is load tested in accordance with BS EN 361 and incorporates a rescue lifting point (Fig
2.9, Item 9).
N
OTE
The rescue lifting point 'D' ring is has a SWL (safe working load) of 200kg.
Removable enclosures (Fig 2.9, Items 2 & 3) on each shoulder strap of the harness keep the
counterlungs stored flat during normal diving operations. These are made in a strong cordura fabric
to prevent damage. To release the counterlungs the diver pulls the actuation cable assembly (Fig
2.9, Item 5). This draws the two actuation cables through a series of Teflon lined loops on the
counterlung enclosures allowing them to fall open and the counterlungs to deploy ready for use. The
harness also has two optional weight pockets (Fig 2.9, Item 7) to enable the diver to adjust his
buoyancy if required.
2.4.2
Counterlungs and enclosures
The counterlungs are fitted inside fabric enclosures (Fig 2.9, Items 2 & 3) which are laced up, whilst
the SLS System is in its stand-by mode, to form a compact protection sleeve over the diver's
shoulders. When the actuation handle (Fig 2.10, Item 7) is pulled, the counterlung enclosures open
up and permit the counterlungs to deploy.
2.4.3 Actuation
cable
assembly
The actuation cable assembly is shown in Fig 2.10. Pulling this cable is one of the actions required
to transfer the SLS System from its stand-by to operational mode. The actuation cable is pulled out
completely when the system is required. This action switches on the two stage regulator to start the
gas bleed and deploys the counterlungs.
The actuation sleeves, which run inside the harness, form an armoured protection sheath for the
actuation cables. These are routed from the harness waistband to the counterlungs and the two
stage regulator. Cable wiper sleeves (Fig 2.9, Item 10) are fitted at the counterlung ends of these
sleeves.
Item
Description
Part No.
1
Harness
C35650
2
Counterlung Enclosure Divers Right
DM46630B
3
Counterlung Enclosure Divers Left
DM36010B
4
Actuation Sleeve Assembly
C45540B
5
Actuation Cable Assembly
C2937
6
Counterlung Assembly
CA2607
7
Weight Pocket
D308
8
Handle Retaining Band
D302
9
Rescue Lifting Point
-
10
Cable Wiper Sleeve
D328
11
Bush
D322
Summary of Contents for Divex SLS Mk IV
