JF FCT King Size 1260, Directions For Use Manual

Page: 12 / 114

1. INTRODUCTION
PIGB-206X-02 FCT1460 0614
- 12 -
6. During work never wear loose clothes or have your hair hang down as it may be
pulled in by the moving parts of the machine.
7. Always wear suitable shoes to avoid falling.
8. Do not change the guards or work with the machine when a guard is missing or
defective.
9. Always drive with the statutory lights and safety marking during transport on
public roads and at night.
10. Limit the transport speed to maximum 30 km/h if the machine has not been
marked with another maximum speed limit.
11. Do not stand near the machine while it is working.
12. When mounting the PTO drive shaft, check that the number of rpm and the
direction of rotation of the tractor match those of the machine.
13. Always use hearing protectors if the noise from the machine is annoying or if
you are working with the machine for a considerable period in a tractor cabin,
which has not been silenced sufficiently.
14. Never allow anybody to be on the machine during work or transport.
15. Never use the machine for other purposes than what it has been constructed
for.
16. Do not allow any children to be near when you are working with the machine.
17. Never stand between the tractor and the machine during connection and
disconnection.
18. Do not feed material into the cutting unit, using hands or feet, while it is working.
19. Do not try to remove material from the cutting unit while it is working.
20. If material must be removed from the forage harvester, the PTO shaft must be
disconnected completely. Stop the engine and remove the ignition key.