manualshive.com logo in svg

Jetter JXM-IO-EW30, User Manual, Page: 30 / 56

Share
Download
Jetter JXM-IO-EW30 User Manual Download Page 30

Jetter AG

Programming | 8

jxm-io-ew30_ba_2151_manual

30 / 56

8 Programming

8.1 Concept and control

The concept of the JXM-IO-EW30-G27 is based on the assignment of interfaces to the inputs
and outputs of the device. Each input and output of the device is called a port and can be config-
ured. The function of a port is determined by assigning an interface to it. Any interface contains
parameters, values and a status:

■

Parameters can be assigned to each interface.

■

Information can be transmitted and set via values to any interface.

■

The status provides information about the status of the interface.

IO Port

IO Interface ID 1

IO Interface ID 2

IO Interface ID 3

IO Interface ID 4

Values
Parameters
Status

Values
Parameters
Status

Values
Parameters
Status

Values
Parameters
Status

Fig. 8: 

Concept and control

8.1.1 Configuration options of connections

The table below shows an overview of the ports and the respective interfaces:

Ports

Description

Supported interfaces

AI_1 … AI_8

Analog inputs

AI_VOLTAGE

AI_CURRENT

DI_PNP

DI_P_1 … DI_P_4

Digital inputs

DI_PNP (DI_NPN only for DI_P_1)

FI_PNP (FI_NPN only for DI_P_1)

ENCI_PNP (each for DI_P_1 and
DI_P_2 as well as for DI_P_3 and
DI_P_4)

PWMi_H3_1 …
PWMi_H3_4

PWM outputs

PWMO_HS3, CPWMO_HS3, DO_HS3

DI_NPN, DI_PNP

PWM_H7_1 … PWM_H7_6 PWM outputs

PWMO_HS7, PWMO_HS3, DO_HS3,
DO_HS7

DI_NPN, DI_PNP

Summary of Contents for JXM-IO-EW30

























































Reviews:

No comments