Jetter JHN Series, Installation Manual

Page: 21 / 44

Jetter AG 21
Servo motors Mechanical installation
Mechanical installation

The installation location must be free from conductive and corrosive
substances.
 For encapsulated installation, please consult the application department of
Jetter AG.
NOTICE
Avoid damage to the servomotor!
If not handled properly, the servo motor can be damaged.

Do
by all means
refrain from applying hard blows or shocks to the
motor flange or shaft.

For fitting backlash-free power output shafts with friction locking, only
use the specifically designed tightening thread in the motor shaft.
If possible, heat the output elements.
Fitting the power output elements may only be carried out by
means of suitable tools. Please follow the instructions given by
the power output element manufacturers.
A special hint: Use double-conical collets.
DANGER
Danger in potentially explosive atmospheres!
Avoid electrostatic charging!
When using pulleys/toothed belt pulleys, unsuitable belts cause
electrostatic charge which can cause an explosion.
Only use belts that do not cause electrostatic charging.
Installation location
Mechanical equipment,
tools
Clutch, timing belt, radial
and axial load