Jetter JHN Series, Installation Manual

Page: 8 / 44

8 Jetter AG
Introduction
Your product has left our factory fully tested and ready to use.
The information on the nameplate applies to rated operating conditions.
Warranty claims only apply to Jetter AG products.
Any warranty claims for a complete system in combination with third-party
products are excluded.
Repairs shall only be carried out by the manufacturer.
Warranty claims become void if the device is opened or if modifications are
made.
The following actions will void the warranty:
 Dismantling or opening of gearbox, motor or encoder electronics.

Incorrect connection of the drive shaft which results in excessive forces
acting on the bearing of the drive shaft.
 Impact or blows to motor, gearbox or encoder.

Mechanical work on the shaft, flange, plug or encoder housing.
Store the motor under the specified ambient conditions for room temperature
and humidity. The permissible ambient temperature range is between -10 °C
and +40 °C. The humidity must be < 50 %. Protect the motor from dirt and
dust.
For protection against impacts and shocks, transport must take place in the
original packaging. In case of damaged packaging inspect the device for any
visible damage, and immediately inform your freight forwarder and Jetter AG
of the damage caused during shipment.
In case of damage or after a fall, do not commission the motor.
Warranty information
Storage and shipment