Jetter JHN Series, Installation Manual

Page: 15 / 44

Jetter AG 15
Servo motors Nameplate, identification
Nameplate, identification
The nameplate contains important information about the motor. The
nameplate attached to the packaging and the motor lets you identify the motor.
Please check the part number on the motor nameplate with the part number
you specified when ordering.
The operating conditions must correspond to the data on the nameplate.
The nameplate contains important information about the motor. If you wish to
contact the hotline of Jetter AG regarding a motor, please have the following
information ready:

Type designation
 Serial number
This name plate with UL Certification Mark is affixed to the motor and outer
carton of motors after successful UL certification:
The information on the above nameplate can be broken down as follows:
Icon Product designation Value
Type Product designation JHN3-0350-050-6RVBP
AN Item number 60881602_2
24/19 Date of manufacture Week 24/year 2019
SN Serial number 1160785
M
o
Continuous stall torque [Nm] 3.5
U
DC
Winding supply voltage [VDC] 320/560V
N
n
Rated speed [RPM] 3000
I
n
Rated current [A] 4.31
P
n
Rated power [kW] 0,942
Class Insulation class F
IP Degree of protection IP65
This nameplate with UL certification mark is attached to the motor on the
center right:
Important information on
the nameplate
Information for the
hotline
Nameplate of JHN and JL
motors with UL
Certification Mark