Jetter JHN Series, Installation Manual

Page: 19 / 44

Jetter AG 19
Servo motors Place of installation, ambient conditions
Place of installation, ambient conditions
NOTICE
Handle servo motors with care!
The following actions will void the warranty:

Dismantling or opening of gearbox, motor or electronics.

Incorrect connection of the drive shaft which generates excessive
forces on the bearings of the shaft.

Mechanical modifications to the shaft, the flange, the connector or
the encoder housing.
NOTICE
Check servo motor before installation!
The servo motor may be damaged.

Check the motor for external damage and faulty connections.

Do not install damaged motors.
The kinds of environment listed below are not apt for installing a servo motor,
as they will have negative effects on the service life of the motor.
Unsuitable installation sites Reason
Outdoor installation site The motor must not be exposed to rain or water
jets. Therefore, do not use a steam jet or other
such devices to clean the motor.
Corrosive or contaminated
surrounding area
The motor can be damaged in corrosive or
contaminated atmosphere.
Check the servo motor
before installation
Unsuitable installation
sites!
Reduced service life