Jetter JHN Series, Installation Manual

Page: 10 / 44

10 Jetter AG
Basic safety instructions
The use of the servo drives and motors outside the aforementioned areas of
application or under operating ranges and environmental conditions other than
those described in the documentation is considered improper operation.
JHN, JHQ and JL servo motors are no safety-related parts as per Machinery
Directive 2006/42/EC. The motors do not provide safety-related features.
When used in safety functions, a higher-level safety system is required and an
additional monitoring and protective device must be provided in accordance
with the applicable safety regulations.
These servo motors must not be used in technical systems which to a high
degree have to be fail-safe. The following areas of application are not intended
applications:
 Aviation and aerospace

Machinery specially designed or used for nuclear applications the failure of
which may result in the emission of radioactivity.
 Medical devices that come into direct contact with the human body.

Machines for transporting and lifting persons.
 Special facilities for use at fairs and amusement parks.
 Devices for domestic use
NOTICE
Destruction of the servomotor!
The servomotor is not intended for direct connection to the three-phase
mains.
Direct connection to the mains will result in its destruction.
They have explicitly been designed for being torque, speed,
and/or position controlled by specific servo amplifiers, such as the
JetMove series by Jetter AG.
Usage other than
intended