Jetter JetMove 208-480, User Manual, Page: 111 / 124

JetMove 208-480 Appendices
Jetter AG 109
Appendix A: List of Illustrations
Fig. 1: Double earthing 15
Fig. 2: Shielding of SUB-D connectors in conformity with the EMC standards 20
Fig. 3: EMC-compatible connection of motor cables 21
Fig. 4: Rear and front view of the JetMove 208-480 enclosure with mounting holes
25
Fig. 5: Physical dimensions of the JetMove 208-480 (in mm) 35
Fig. 6: Maximum heat sink temperature depending on the motor current 40
Fig. 7: Block diagram of drive controller structure 45
Fig. 8: Connection of the power supply 47
Fig. 9: Connection of motor lines 49
Fig. 10: View on the SC series mating connector of the motor (internal thread M23)
50
Fig. 11: SM series mating connector of the motor (internal thread M40) 53
Fig. 12: RC series mating connector of the resolver (internal thread M23) 57
Fig. 13: RC series HIPERFACE® mating connector (internal thread M23) 60
Fig. 14: Sin-cos encoder connection with adapter 63
Fig. 15: Wiring of X63 for connecting the internal ballast resistor 67
Fig. 16: Wiring of X63 for connecting the internal and external ballast resistor 67
Fig. 17: Wiring of X63 for the external ballast resistor only
68
Fig. 18: Wiring of X63 for coupling DC link circuits of up to three JetMove 208-480
70
Fig. 19: Connection details for digital outputs 74
Fig. 20: Connection diagram of JetMove 208-480-RE 85
Fig. 21: Connection diagram of JetMove 208-480-HI 86
Fig. 22: RC series mating connector of the EnDat (internal thread M23) 100