Jetter JetMove 208-480, User Manual, Page: 81 / 124

JetMove 208-480 9.1 Fault Messages
Jetter AG 79
9 Diagnostics
9.1 Fault Messages
INFO
In the case of a fault message, the letter "F" and two successive numbers appear
on the 7-segment display every second.
Fault Message Table JetMove 208-480
Fault
Number Type of Fault Description Response to
Faults Troubleshooting
F 00 Hardware error Internal hardware
defect – Immediate
motor power
disable
– Separate the drive
controller from the
power lines
– Return the amplifier for
repair
F 01 Internal supply
error One or more power
supply voltages are
beyond their limits. – Immediate
motor power
disable
– Separate the drive
controller from the
power lines
– Return the amplifier for
repair
F 02 Mains phase
error The servo amplifier
has diagnosed the
failure of one of the
mains phases. – Immediate
motor power
disable
– Check fuses and wiring
– Acknowledge failure
F 03 Motor cable
breakage The motor cable is
broken
Please be careful:
The motor cable is
tested at enabling
the controller for
the first time.
– Immediate
motor power
disable
– Check the motor cable
connections
– Acknowledge failure
F 04 Overvoltage in
the DC link A DC link voltage
>850 V has been
detected. – Immediate
motor power
disable
– Check input voltage
supply.
– If the motor is used as a
generator, reduce the
regenerating power
– Acknowledge failure