Jetter JetMove 208-480, User Manual, Page: 27 / 124

JetMove 208-480 2.4 Checking the Installation
Jetter AG 27
2.4 Checking the Installation
2.5 Notes on Safety as Regards the
Installation
Check motor and servo amplifier wiring and connections by means of
the connection diagrams.
Check the holding brake, if existing, for proper functioning.
Check to see whether all necessary protection measures against
accidental contact with live or moving parts have been taken.
Carry out any other checks specific to, or required for, your system.
DANGER
Hazard caused by high operating voltage and electric
shock!
Extremely hazardous voltages of up to 850 V may occur!
Please observe the following precautions in order to avoid muscle cramps, burns,
unconsciousness, respiratory standstill, etc., and death:
Have installation and maintenance jobs carried out by qualified personnel
only, see chapter 1.1.3 "Qualified Personnel", page 12.
Switch off the operating voltage.
Please take into account the information on residual dangers given in
chapter 1.3.2 "Hazards after POWER has been Turned OFF", page 18.
Before carrying out installation and maintenance jobs, separate the servo
amplifier JetMove 208-480 and all connected devices from the mains (pull
out the mains plug).