Jetter JetMove 208-480, User Manual, Page: 86 / 124

9 Diagnostics
84 Jetter AG
9.2 Alarms
If the dot in the display is flashing, one or several alarms have been recognized.
Please check in the motion setup or by issuing the motion commands in the PLC
program which alarm has been activated.
F 45 Communication
error CAN controller is in
Bus OFF state.
The error counter
value has reached
255. – Stop with
emergency
stop ramp
– Check the
communication
connection
F 46 Communication
error A smart encoder
(EnDat 2.2) may
have sent an error
message – Immediate
motor power
disable
– Check the parameters
– Check the encoder
Fault Message Table JetMove 208-480
Fault
Number Type of Fault Description Response to
Faults Troubleshooting