Jetter JetMove 208-480, User Manual, Page: 38 / 124

5 Technical Data
38 Jetter AG
Overload protection For each phase an external overload
protection is required, for example
– Circuit-breaker 16 A C
– Fusable cut-out 16 A M (medium time
lag)
– Motor circuit breaker 16 A
For systems with NRTL approval use
overload protection devices that are NRTL
listed (acc. To UL 508)(NKJH) ) self
protected combination motor controller
(specification: 16 A).
The JetMove 208-480 is suitable for use on
a circuit capable of delivering not more
than 5000 (rms) symmetrical Amperes,
480 Volts maximum.
Supply cable
Cable size
Material
Temperature class
4 * 1.5 mm
2
(AWG 16)
Copper
> 60 °C
Maximum output voltage of the
motor 850 V
Motor output current at an ambient
temperature of 45 °C Nominal current: I
rms
= 8 A
Peak current for a max. period of 5
minutes:
I
rms
= 16 A
(The duration depends on the temperature
of the heat sink)
See "INFO 1" on page 40.
Continuous output 4.5 kW (6.1 hp)
Short-circuit protection, motor side Designed for:
• Phase to phase
• Phase to earth
Motor overload protection Refer to "Motor Protection" on page 41
Motor cable
Cable size
Material
Capacitance
Temperature class
Max. length of motor cable
4 * 1.5 mm
2
(AWG 16)
Copper
< 150 pF/m
> 60 °C
50 m max.
(for greater length please contact
Jetter AG)
Electrical Specifications