Jetter JetMove 208-480 User Manual Download Page 94

Page: 94 / 124

12 Ethernet Interface (Option)

Jetter AG

12.2.1 Connection between the

JetMove 208-480...-OEM and a PC or
JetControl

Direct connection between a PC or JetControl and a JetMove 208-480...-OEM is
established by means of a crossover cable.

12.2.2 Connection between the

JetMove 208-480...-OEM and a PC or
JetControl through a Switch

If connection between PC or JetControl and a JetMove 208-480...-OEM is
established through a switch, straight-through cables have to be used.

LEDs of the JetMove 208-480...-OEM Ethernet

Designation

Description

ACT

Activity: The JetMove 208-480...-OEM
transmits or receives data via the
Ethernet

LNK

Linkage: The JetMove 208-480...-OEM
is linked with the Ethernet

INFO

Terminals have to be interconnected by means of crossover-cables:

• PC to PC
• JetControl to PC
• JetControl to JetMove...-OEM
• etc.

Terminals with infrastructure components (e.g. switch) have to be
interconnected via straight-through cables:

• PC to switch
• JetControl to switch
• JetMove...-OEM to switch
• etc.

Summary of Contents for JetMove 208-480





























































































































Search results

Summary of Contents for JetMove 208-480

Reviews:

Jetter JetMove 208-480, User Manual, Page: 94 / 124

Search results

Summary of Contents for JetMove 208-480

Reviews: