Jetter JetMove 208-480, User Manual, Page: 102 / 124

14 Counting Input (Option)
100 Jetter AG
14.2.2 Description of Connections
Specification of Mating Connector for X72
• 9-pin male SUB-D connector
• Metallized enclosure
EnDat Cable Specification
• Cable size: 2 * 2 * 0.14 mm² + 2 * 0.25 mm² (AWG 26(4) + AWG 23(2))
2 * 0.25 mm² has to be used for power supply and GND.
• The cables have to be twisted in pairs and included in an overall shielding:
• The following signal lines have to be twisted in pairs:
DATA - and DATA +
Clock - and Clock +
0 V and voltage supply
• The shield has to be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
• Material: Copper
• Temperature class: 60 °C
• Maximum cable length: 100 m
14.2.3 EnDat Cable with Mating Connector
EnDat mating connector (solder side)
Fig.: 22: RC series mating connector of the EnDat (internal thread M23)
INFO
The EnDat mating connector can be ordered from Jetter AG by specifying item
number 15100069.
The ready-made EnDat cable between servo amplifiers of the JetMove 2xx series
and Jetter motors can be ordered from Jetter AG by specifying the following cable
confection number:
KAY_0723-xxxx For servo amplifiers of the JetMove 2xx series
Solder
Side
12
9
11
5
7
8
6
4
10 2
1
3