Jets™ 25MBA Vacuumarator™ pump
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. 200025004
Doc. Rev.: 22 (2021-06-08)
6
Pre-Installation
The following installation information is only applicable for single pump installations. If a Vacuum Unit is supplied by Jets Vacuum AS, please refer
to the Vacuum Unit information.
Installation Site Considerations
1. Installation space requirements can be determined from the dimension drawing.
2. Proper lifting devices should be available for installation, service and maintenance.
3. The location of the installation should have sufficient clearance around the pump to allow for ventilation and heat dispersal.
4. Select a mounting plate which will minimize vibration and torsion of the baseplate. A solid and sturdy base is necessary.
5. To ease service of the pump we recommend installing a shut-off valve on both the inlet and the outlet of the pump (not included in product
delivery).
6. Ensure that all safety information has been read and precautions have been taken.
7. Installation must comply with all local, state and federal safety codes and practices.
Installation
Lifting Instructions
1.10 Warning
Failure to properly lift and support equipment can result in serious physical injury and/or equipment damage.
The pump must be lifted, moved and transported in a horizontal position.
Lifting precautions:
● Total weight
● Center of gravity
● Maximum outside dimensions
Generally, it is recommended that the pump be transported on a pallet or similar using a forklift or with appropriate lifting equipment. For safe lifting
with a crane, it is recommended to use appropriately dimensioned and certified straps, slings or belts.
6.10 Warning
• Do not stand under or pass beneath an elevated load.
• Do not stand within the swing radius of the lifting equipment.
• Never leave the lifting equipment unattended with an elevated load.
• Wear proper PPE (hardhat, safety shoes and gloves should be worn as a precaution when lifting the load).
• Keep bystanders at a safe distance.
• Never use two lifting devices in tandem to lift the load.
• If the person receiving this technical information will not be the user of the lifting equipment, forward these instructions to the operator.
• If there is any doubt as to the operation or safety of the equipment, do not lift the load.
• Failure to follow these instructions could result in damage to equipment, injury or death.
Prior to Lifting a Vacuumarator™ Pump
Drain the pump of all liquid. Rinse and plug any openings to prevent spillage. For instructions regarding draining the pump, refer to the service and
maintenance information for the pump.
Correct Vacuumarator™ Pump Lifting Method
The following is Jets Vacuum AS recommended lifting method. The
following method has been fully tested and adopted as the most
suitable means of lifting the pump.
Position the straps as illustrated. Using appropriately dimensioned
lifting equipment, slowly raise the pump from the surface.
