manualshive.com logo in svg

Jetbook 8724PX, User Manual

Share
Download
Jetbook 8724PX User Manual Download Page 252

Modules

7 - 66 Sound Blaster Audio

7

SBX Pro Studio

Click the tickbox to enable/disable the control, and use the slider to adjust the levels.
Press the play 

 button to test settings.

•

Crystalizer:

 Enhances audio to make it sound livelier. 

•

Surround:

 Provides virtual sound channels to control the level of immersion.

•

Bass:

 Enhances the bass level of the sound system.

•

Dialog Plus:

 Enhances dialogue levels for movies etc.

•

Smart Volume:

 Minimizes sudden volume changes to avoid the need for con-

stant adjustment. It is recommended that this is set to 

Loud

 (see sidebar).

Smart Volume 

Setting

The default setting for

Smart Volume

 in 

SBX

Pro Studio

 is set to

Normal

. 

To get the full effect of
this setting it is recom-
mended that you set it to

Loud

.

Figure 7 - 53

Sound Blaster X-Fi 3 

SBX Pro Studio

Summary of Contents for 8724PX



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands