Jetbook 8724PX User Manual Download

Page: 237 / 322

Modules

Intel® Rapid Start Technology Driver 7 - 51

Intel

Rapid Start Technology Driver

Intel(R) Rapid Start Technology

can resume power from Hibernation within 5 to

6 seconds and can remember your computer's previous state with zero power.

System Requirements to support Intel® Rapid Start Technology:

• Rapid Start Technology should be enabled in the BIOS (see “

“Intel(R) Rapid

Start Technology (Advanced Menu)” on page 5 - 8

• Intel Rapid Storage Technology software installed.
• A Solid State Drive (SSD) with a minimum capacity of 18.6GB.

See overleaf for instructions on enabling

Intel® Rapid Start Technology

Summary of Contents for 8724PX



































































































































































































































































































































Search results

Summary of Contents for 8724PX

Reviews:

Related manuals for 8724PX

Brands by name

Popular brands

Jetbook 8724PX, User Manual

Search results

Summary of Contents for 8724PX

Reviews:

Related manuals for 8724PX

Brands by name

Popular brands