manualshive.com logo in svg

Jetbook 8724PX, User Manual

Share
Download
Jetbook 8724PX User Manual Download Page 197

Modules

Setting Up SATA RAID or AHCI Mode 7 - 11

7

Deleting a RAID (Windows 8)

If you wish to delete an existing RAID then follow the procedure below to do so. How-
ever 

backup up any necessary files and data before deleting a RAID

, as doing so

will result in the loss of all data on the RAID volumes.

1.

Start-up your notebook computer and press <F2>

 

to enter the 

BIOS

.

2.

Go to 

Intel(R) Rapid Storage Technology

 (in the 

Advanced

 menu) and press 

<Enter>.

3.

Go to the RAID (listed under 

RAID Volumes:

) and press <Enter>.

4.

Select 

Delete 

and press <Enter>.

5.

Select “

Yes

” (note that al the data on the volumes will be lost) and press <Enter>.

Figure 7 - 5

Delete RAID 

(Advanced > Intel(R) 

Rapid Storage 

Technology)

Summary of Contents for 8724PX



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands