Jensen A540 Di D-1703 EDR 80km/h, Operating Instructions Manual

Page: 49 / 98

HMCflex Operating instructions
4/23 © ehb errors and omissions excepted Operating instructions.doc
1. General
1.1 Introduction
The HMCflex offers a wide range of functions for the management and monitoring of both conven-
tional and electronically controlled diesel engines. The settings can be individually configured for the
widest variety of applications and different versions of the engine. For example, the HMCflex can pro-
vide preheat, glow or afterglow for the engine up to 70 A, depending on the time and temperature. The
oil pressure, along with the engine temperature, can be monitored using switches or sensors. An input
for monitoring the alternator as well as an aux. input are also available. The operating magnet along
with another magnet, for example for speed regulation, are controlled via the outputs for hold and pull
coils. In addition, an alarm output and an auto boot function are available and the engine can be
switched off via an external stop input.
For use on wood chippers in addition the decrease of the chipping disc speed, the feeder will be
stopped. The feeder can be turned off manually with key switches also. For reasons of personal safety
the reverse mode is activated first after a restart, before the feeder is active.
On the double-spaced display you can view important operating parameters as well as the engine's
operating hours.
Further parameters can be displayed in the framework of customised software.
1.2 Target group
This documentation is aimed at the service staff of equipment where the HMCflex is incorporated.
1.3 Important instructions for using the device
Use The device must only be operated using the accessories delivered with it.
Cleaning should only be carried out using mild cleaning agents.
Please do not introduce any objects that are not suitable for the specified purpose
into openings in the device, as this may lead to failures in the electronics.
When operating the device, comply with the general
accident prevention regulations.
Security
Do not operate the HMCflex within range of strong electromagnetic fields.
Comply with the temperature ranges stated under 0.
Storage
An HMCflex that is not being used may only be stored in accordance with its oper-
ating specification.
Dispatch
Whenever it is shipped, the device must always be packed in its original packaging
or in comparably robust packaging.
Improper packaging of this kind comes under the heading of
Negligence,
which
disqualifies the device from repair under warranty.
Maintenance
During its whole service life, the HMCflex requires no maintenance and needs no
special servicing.
Opening the
HMCflex
The HMCflex contains no parts that can be maintained, exchanged or repaired by
the customer or by anyone other than authorised ehb service staff.
The HMCflex is sealed to prevent unauthorised opening. Please note that opening
the device will damage it beyond repair.