28
9.4.2
Move Axis by Click for ROTAX® Rotary Motor or
Third Party Motors
The XENAX® Servo Controller automatically
recognizes the ROTAX® rotay motor.
If the XENAX® servo controller does not recognize a
LINAX® or ELAX® linear motor axis or a ROTAX® rotary
axis, XENAX® assumes a connection with third party
motor
. Instead of “Go Pos 0“
WebMotion® offers
Jog + und Jog
–
functions.
Jog -
Runs the motor in negative direction until the
command “Stop Motion” stops the motor.
Jog +
Runs the motor in positive direction until the
command “Stop Motion” stops the motor.
While the motor is running with Jog, the dynamics
SP OVERRIDE or SPEED can be adjusted online.
