manualshive.com logo in svg

Jeio tech IST-3075, Operating Manual, Page: 69 / 70

Share
Download
Jeio tech IST-3075 Operating Manual Download Page 69

 

６３ 

 

9.4.2 

Warranty exception

 

Customer can’t get free warranty service in case of as below.

 

 

•

 

If the product is broken due to the user’s fault. 

•

 

If the product is broken due to improper operation or storage. 

•

 

If the product is broken due to improper modify or repairing. 

•

 

If the product is broken due to overuse of voltage or earthshock. 

•

 

     

If the product is broken without taking care of the “Notice” alerted 

on the manual.

 

 

9.4.3 

Service and technical advice

   

We, Jeiotech Co., Ltd. are doing best to give best support based on customer service system. 

When  we  get  the  symptoms,  fault  states,  contact  number  by  customer,  we  offer  after  sales 

service. 

 

International Sales Head Office (Korea)   
#1005, Byucksan Digital Valley 6-Cha, 481-4 Gasan-Dong, Geumcheon-Gu, Seoul 153-704,   
Korea 
Tel: +82 2 2627 3816     
  E-mail: 

[email protected]

 

 

Summary of Contents for IST-3075







































































Reviews:

No comments