Jeio tech IST-3075, Operating Manual, Page: 43 / 70

３７
4.4.6 Reset
Initialize the changed value to the factory value.
1 Temperature Calibration Initialize the calibration value.
2 RPM Calibration Initialize the calibration value.
3 Auto Tuning Initialize the calibration value.
4 Touch Screen Initialize the calibration value.
5 Operating Parameters Initialize the calibration value.
6 Factory Default Initialize the calibration value of all parts.

Auto tuning parameter can be initialized to the factory value.
4.5 Safety Tool
4.5.1 Over Temp. Limiter
This model has the over temp limit and temp sensor in the main controller.
Over temp limit is located on the right down side of the unit.
Set the over
temp limit over 15% than normal use temperature by a flat head screwdriver.
In case of that the temperature in the chamber over set temp, the operation
discontinues.