Jeio tech IST-3075, Operating Manual, Page: 17 / 70

１１
(5) Heater
Temperature control is up to 80℃ by two 400W pin heaters.
(6) Over Temperature Limiter
Over temperature limiter is independently configured from the main controller. The inner
temperature of the chamber exceeds more than the set temperature, the device cut off the
power to the power switch for the secure condition. (Refer to ‘4.5 Safety Device’)
(7) Shaking Table
Shaking table is connected to a shaking system and Accessory such as Universal Platform
can be equipped on shaking table.
(8) Control Panel
There are independent displays for each Temperature, RPM, Timer and there are and
start/stop buttons and LED on/off buttons.
(9) Computer Interface
The unit can be controlled by PC through USB port and RS-232 port. In the case
of connecting both of the port, the USB port will be priority.
(10) Condensate Drain Barb
In case of the liquid leakage caused by spilled reagent or cracked flask inside of the chamber,
the liquid is designed to be drained out through the drain of the unit. The drain barb is
made of chromium plated copper and it is easy to connect 6mm ID soft-walled tubing to the
condensate drain. (Refer to ‘3.5 Attaching Condensate Drain’)
(11) Power Switch and Fuse
Power switch provide the main power to the device. Fuse protects the device from
instantaneous overcurrent. In case of fuse replacement, check the rated power. (Refer to 5.4