３１
4.2.4.2 Faults
Fault Alarm stops the unit and inform it to the user when the unit need forced stop for the
protection. Fault alarm are over-temp protection, Load Unbalance, Door Open, Sensor Fault, Over
Current.
4.3
General Settings
Set the general operating. Touch General Setting button and below setting menu is appeared. Touch
the ‘<’ or ‘>’ and explore the menu.
1
Shaking Direction Set the shaking direction
•
CW(clock wise), CCW(counter clock wise)
2
Temperature Unit C°/F°
3
Lock
Use the Lock or not
4
System Sound
Mute for sound or not
5
LCD Brightness
Adjust the brightness of LCD
6
LCD Auto Dim
LCD Dim function (No input, LCD dim)
7
Dim Brightness
LCD Dim, and the brightness of the dim
8
Dim Time Out
Waiting time for LCD Dim mode operating
9
Light Brightness
Select the brightness of LED
10 Light Auto
Door opened, auto LED light on
11 Auto Restart
Auto restart function. The unit is back to the operating, before the
power out.(Time information is not back)
12 USB (RS232)
USB and RS-232 port is available for the PC. Select the mode when PC
is connected.
Report Only : PC received the information from the unit.
Slave Mode : PC control the unit.
Summary of Contents for IST-3075
Page 12: ...６ Foot crush Hand crush or pinch Lifting hazard Do not take the device apart deliberately ...
Page 19: ...１３ ...
Page 22: ...１６ ...