Jeep Navigation User Manual Download

Page: 36 / 246

5. Press the BACK button to go to the previous screen.
You can also press the SETUP button to exit the Setup
screen.

User Time

It is possible to set up you own time (ahead or behind
actual GPS time).

Set Hours

1. Turn the CENTER CONTROL knob until User Time is
highlighted.

2. Press the JOYSTICK to select the User Time option.

NOTE:

The check-mark indicates the currently active

setting.

3. Turn the CENTER CONTROL knob to highlight Set
Hours.

4. Press the JOYSTICK to select the desired setting.

5. Turn the CENTER CONTROL knob to adjust the
hours.

6. Press the JOYSTICK again.

Set Minutes

1. Turn the CENTER CONTROL knob to highlight Set
Minutes.

2. Press the JOYSTICK to select the desired setting

3. Turn the CENTER CONTROL knob to adjust the
minutes.

4. Press the JOYSTICK again.

5. Press the BACK button to go to the previous screen.
You can also press the SETUP button to exit the Setup
screen.

NAVIGATION

Summary of Contents for Navigation























































































































































































































































Search results

Summary of Contents for Navigation

Reviews:

Related manuals for Navigation

Brands by name

Popular brands

Jeep Navigation, User Manual

Search results

Summary of Contents for Navigation

Reviews:

Related manuals for Navigation

Brands by name

Popular brands