Jeep Navigation, User Manual

Page: 144 / 246

After the second call has established, press and hold the
Uconnect™ Phone
button until you hear a double
beep indicating that the two calls have been joined into
one conference call.
Call Termination
To end a call in progress, momentarily press the
Uconnect™ Phone
button.
Only the active call/s will be terminated and if there is a
call on hold, it will become the new active call.
If the active call is terminated by the far end, a call on
hold may not become active automatically. This is cell
phone dependent.
To bring the call back from hold, press and hold the
Uconnect™ Phone
button until you hear a single
beep
Redial
1. Press the Uconnect™ Phone button to begin.
2. Wait for the beep.
3. Say REDIAL.
4. Uconnect™ Phone will call the last number that was
dialed on your cellular phone.
NOTE: This may not be the last number dialed from
Uconnect™ Phone.
Call Continuation
Call continuation is progression of a phone call on
Uconnect™ Phone system after the vehicle ignition key
has been switched to off. Call continuation functionality
available on the vehicle can be any one of three types:
132 NAVIGATION