Jeep Navigation, User Manual

Page: 32 / 246

GETTING STARTED
NOTE: The ignition switch must be in the ON or ACC
position to operate the navigation radio.
If the unit is off, switch it on by pressing the ON/OFF
Volume rotary knob.
Disclaimer for Navigation Radio
Before using the navigation radio read and accept the
disclaimer. The disclaimer will be activated after the
ignition is turned on. Press the JOYSTICK to accept the
disclaimer.
Change the Language
The navigation radio will conform to the vehicle lan-
guage set in the ELECTRONIC VEHICLE INFORMA-
TION CENTER (EVIC), if equipped.
If you change the language in the navigation radio, the
vehicle will change the language for all display informa-
tion. Refer to the vehicles owner’s manual.
To change the language with the navigation radio:
1. Press the SETUP button.
2. Turn the CENTER CONTROL knob until Language
Settings is highlighted in the Setup menu.
20 NAVIGATION