Home
/
Jeep
/
2009 Grand Cherokee
/
Owner'S Manual

Jeep 2009 Grand Cherokee, Owner'S Manual, Page: 398 / 521

Share

Page: 398 / 521

Jeep 2009 Grand Cherokee Owner'S Manual Download Page 398

3. Assemble the jack and jacking tools as shown. Connect
jack handle driver (1) to two extensions (2), then to the
lug wrench (3).

4. Locate the jack as shown. For the front axle, place it
under the front lower control arm as shown. For the rear
axle, place it under the axle near the wheel to be changed.
Ensure the jack is closest to the inside of the wheel when
jacking on the rear axle. Do not raise the vehicle until
you are sure the jack is fully engaged.

Assembling Jack Tools

1 — Jack Handle Driver
2 — Extensions
3 — Wrench

Front Jacking Location

396

WHAT TO DO IN EMERGENCIES

«
...
396
397
398
399
400
...
»

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments