manualshive.com logo in svg

Jeep 2009 Grand Cherokee, Owner'S Manual, Page: 48 / 521

Share
Download
Jeep 2009 Grand Cherokee Owner'S Manual Download Page 48

WARNING!

Using a seat belt extender when not needed can
increase the risk of injury in a collision. Only use
when the lap belt is not long enough when it is worn
low and snug, and in the recommended seating
positions. Remove and store the extender when not
needed.

Driver and Front Passenger Supplemental
Restraint Systems (SRS)

This vehicle has airbags for both the driver and right
front passenger as a supplement to the seat belt restraint
systems. The driver’s front airbag is mounted in the
steering wheel. The front passenger airbag is mounted in
the instrument panel, above the glove compartment. The
words SRS/AIRBAG are embossed on the airbag covers.

NOTE:

The front airbags are certified to the Federal

regulations that allow less forceful deployment.

1 — Driver Airbag
2 — Passenger Airbag
3 — Knee Bolster

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments