Jeep 2009 Grand Cherokee Page 469 Owner'S Manual Download

Page: 469 / 521

36,000 Miles (60,000 km) or
36 Months Maintenance
Service Schedule

❏

Change the engine oil and engine oil
filter.

❏

Rotate tires.

❏

If using your vehicle for any of the
following: Dusty or off-road conditions.
Inspect the engine air cleaner filter;
replace if necessary.

❏

Inspect the brake linings, replace if
necessary.

❏

Inspect the front and rear axle fluid,
change if using your vehicle for police,
taxi, fleet, off-road or frequent trailer
towing.

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

42,000 Miles (70,000 km) or
42 Months Maintenance
Service Schedule

❏

Change the engine oil and engine oil
filter.

❏

Rotate tires.

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

48,000 Miles (80,000 km) or
48 Months Maintenance
Service Schedule

❏

Change the engine oil and engine oil
filter.

❏

Rotate tires.

❏

If using your vehicle for any of the
following: Dusty or off-road conditions.
Inspect the engine air cleaner filter;
replace if necessary.

❏

Inspect the brake linings; replace if
necessary.

❏

Inspect the CV joints.

❏

Inspect exhaust system.

❏

Inspect the front suspension, tie rod ends
and boot seals; replace if necessary.

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

MAINTENANCE SCHEDULES

467

T
E

N
A
N
C

S
C
H

D
U

L
E

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Grand Cherokee

Reviews:

Related manuals for 2009 Grand Cherokee

Brands by name

Popular brands

Jeep 2009 Grand Cherokee, Owner'S Manual

Search results

Summary of Contents for 2009 Grand Cherokee

Reviews:

Related manuals for 2009 Grand Cherokee

Brands by name

Popular brands