Jeep 2009 Grand Cherokee Owner'S Manual Download Page 69 | Manualshive

Page: 69 / 521

Jeep 2009 Grand Cherokee Owner'S Manual Download Page 69

the buckle, turn the buckle around, and insert the latch
plate into the buckle again. If you still can’t make the
child restraint secure, try a different seating position.

To attach a child restraint tether strap:

Route the tether strap over the seatback and attach the
hook to the tether anchor located on the back of the seat.
For the outboard seating positions, route the tether over
the head rests, and attach the hook to the tether anchor
located on the back of the seat.

WARNING!

Always remove the subwoofer from the vehicle
whenever the tether anchors behind the subwoofer
are required for proper installation of a child re-
straining device. In the event of an accident, or under
severe vehicle maneuvers, leaving the subwoofer
unsecured in the vehicle could result in serious or
fatal injury to anyone in the vehicle.

Tether Strap Mounting

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

67

2

«
...
67
68
69
70
71
...
»

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments