Home
/
Jeep
/
2009 Grand Cherokee
/
Owner'S Manual

Jeep 2009 Grand Cherokee, Owner'S Manual, Page: 174 / 521

Share

Page: 174 / 521

Jeep 2009 Grand Cherokee Owner'S Manual Download Page 174

The cargo load floor is held by spring loaded latches. In
order to use the cargo load floor, use the following
procedure:

NOTE:

The cargo load floor latches should not be

used as cargo tie-downs.

1. Flip up pull loop(s) so they are perpendicular (straight
up) to the top surface of the tray.

2. Pull up on loop(s) and twist 90 degrees, so they are
parallel to the slotted hole in tray.

3. Lift the tray over the loop(s), and reposition the tray.

4. Pull up on the loop(s) and twist 90 degrees, so they are
perpendicular (straight up) to the slotted hole in tray.

5. Push the loop(s) back down, so they are parallel to the
top of the tray.

REAR WINDOW FEATURES

Rear Window Wiper/Washer

A switch on the right side of the steering column controls
operation of the rear wiper/washer function. Rotating
the center of the switch forward to the on position will
activate the wiper. The rear wiper operates in an inter-
mittent mode only. Rotating the center of the switch all
the way forward will turn on the wash function. The
wash pump will continue to operate as long as the button
is pressed. Upon release, the wipers will cycle two times
before returning to the set position.

172

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
172
173
174
175
176
...
»

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments