manualshive.com logo in svg

Jeep 2009 Grand Cherokee, Owner'S Manual, Page: 396 / 521

Share
Download
Jeep 2009 Grand Cherokee Owner'S Manual Download Page 396

WARNING!

Do not attempt to change a tire on the side of the
vehicle closest to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Set the parking brake.

3. Place the shift lever into PARK.

4. Turn the ignition OFF.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite of the jack-
ing position. For example, if changing
the right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:

•

Always park on a firm, level surface as far from
the edge of the roadway as possible before raising
the vehicle.

•

Block the wheel diagonally opposite the wheel to
be raised.

•

Set the parking brake firmly and set an automatic
transmission in PARK; a manual transmission in
REVERSE.

(Continued)

394

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments