Jeep 2009 Grand Cherokee Owner'S Manual Download Page 49 | Manualshive

Page: 49 / 521

Jeep 2009 Grand Cherokee Owner'S Manual Download Page 49

The front airbags have a multistage inflator design. This
may allow the airbags to have different rates of inflation
that are based on collision severity and occupant size.

This vehicle is equipped with window bags to protect the
driver, and front and rear passengers sitting next to a
window. They are located above the side windows. Their
covers are also labeled SRS/AIRBAG.

NOTE:

Airbag covers may not be obvious in the interior

trim; but they will open to allow airbag deployment.

Window Airbag Location

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

47

2

«
...
47
48
49
50
51
...
»

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments