Home
/
Jeep
/
2009 Grand Cherokee
/
Owner'S Manual

Jeep 2009 Grand Cherokee, Owner'S Manual, Page: 389 / 521

Share

Page: 389 / 521

Jeep 2009 Grand Cherokee Owner'S Manual Download Page 389

NOTE:

When shifting out of transfer case NEUTRAL,

turning the engine OFF may be required to avoid gear
clash.

WARNING!

You or others could be injured if you leave the
vehicle unattended with the transfer case in the
NEUTRAL position without first fully engaging the
parking brake. The transfer case NEUTRAL position
disengages both the front and rear driveshafts from
the powertrain and will allow the vehicle to move
even if the transmission is in PARK. The parking
brake should always be applied when the driver is
not in the vehicle.

CAUTION!

Do not use a bumper-mounted clamp-on tow bar on
your vehicle. The bumper face bar will be damaged.

STARTING AND OPERATING

387

5

«
...
387
388
389
390
391
...
»

Summary of Contents for 2009 Grand Cherokee










































































































































































































































































































































































































































































































































Reviews:

No comments