Jeep 2009 COMPASS Owner'S Manual Download

Page: 99 / 439

Mute/Un-Mute (Mute OFF)
When you mute the UConnect

威

system, you will still be

able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnect

威

system:

•

Press the VOICE RECOGNITION button.

•

Following the beep, say

⬙

Mute.

⬙

In order to un-mute the UConnect

威

system:

•

Press the VOICE RECOGNITION button.

•

Following the beep, say

⬙

Mute off.

⬙

Advanced Phone Connectivity

Transfer Call to and from Cellular Phone
The UConnect

威

system allows ongoing calls to be trans-

ferred from your cellular phone to the UConnect

威

system

without terminating the call. To transfer an ongoing call
from your UConnect

威

paired cellular phone to the

UConnect

威

system or vice versa, press the VOICE REC-

OGNITION button and say

⬙

Transfer Call.

⬙

Connect or Disconnect Link Between the
UConnect

威

System and Cellular Phone

Your cellular phone can be paired with many different
electronic devices, but can only be actively

⬙

connected

⬙

with one electronic device at a time.

If you would like to connect or disconnect the Bluetooth

威

connection between a UConnect

威

paired cellular phone

and the UConnect

威

system, follow the instructions de-

scribed in your cellular phone User’s Manual.

List Paired Cellular Phone Names

•

Press the PHONE button to begin.

•

After the “Ready” prompt and the following beep, say
“Setup Phone Pairing.”

•

When prompted, say

⬙

List Phones.

⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands