Jeep 2009 COMPASS Page 16 Owner'S Manual Download

Page: 16 / 439

CAUTION!

An unlocked car is an invitation to thieves. Always
remove the key from the ignition and lock all the
doors when leaving the vehicle unattended.

Manual Transmission

1. Turn the ignition switch to the ACC (Accessory)
position.

2. Push the key and cylinder inward and rotate the key to
the LOCK position.

3. Remove the key from the ignition switch lock cylinder.

Ignition Switch Positions

1 — LOCK

3 — ON

2 — ACC (ACCESSORY)

4 — START

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands