Jeep 2009 COMPASS Owner'S Manual Download Page 371

Page: 371 / 439

The most common causes of corrosion are:

•

Road salt, dirt and moisture accumulation.

•

Stone and gravel impact.

•

Insects, tree sap and tar.

•

Salt in the air near sea coast localities.

•

Atmospheric fallout/industrial pollutants.

Washing

•

Wash your vehicle regularly. Always wash your ve-
hicle in the shade using MOPAR

威

Car Wash or a mild

car wash soap, and rinse the panels completely with
clear water.

•

If insects, tar or other similar deposits have accumu-
lated on your vehicle, use MOPAR

威

Super Kleen Bug

and Tar Remover to remove.

•

Use MOPAR

威

Cleaner Wax to remove road film, stains

and to protect your paint finish. Take care never to
scratch the paint.

•

Avoid using abrasive compounds and power buffing
that may diminish the gloss or thin out the paint
finish.

CAUTION!

Do not use abrasive or strong cleaning materials such
as steel wool or scouring powder, which will scratch
metal and painted surfaces.

MAINTAINING YOUR VEHICLE

369

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Brands by name

Popular brands