Jeep 2009 COMPASS Page 404 Owner'S Manual Download

Page: 404 / 439

120,000 Miles (200,000 km) or 120 Months Maintenance Service
Schedule

❏

Change the engine oil and engine oil filter.

❏

Rotate tires.

❏

Replace the engine air cleaner filter.

❏

Inspect the brake linings; replace if necessary.

❏

Adjust the parking brake on vehicles equipped with four-wheel disc brakes.

❏

Replace the air conditioning filter.

❏

Inspect the CV joints.

❏

Inspect exhaust system.

❏

Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

❏

Replace the spark plugs (except 2.4L PZEV).

❏

Replace rear drive assembly (RDA) fluid.

❏

Replace power transfer unit (PTU) fluid.

❏

Change the automatic transmission fluid and filter.

❏

Replace the accessory drive belt(s).

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

126,000 Miles (210,000 km) or
126 Months Maintenance
Service Schedule

❏

Change the engine oil and engine oil
filter.

❏

Rotate tires.

Odometer Reading

Date

Repair Order #

Dealer Code

Signature Authorized Chrysler Dealer

402

MAINTENANCE SCHEDULES

T
E

N
A
N
C

S
C
H

D
U

L
E

Summary of Contents for 2009 COMPASS
























































































































































































































































































































































































































































Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands

Jeep 2009 COMPASS, Owner'S Manual

Search results

Summary of Contents for 2009 COMPASS

Reviews:

Related manuals for 2009 COMPASS

Brands by name

Popular brands